Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22.
For use in locations where a high degree of corrosion resistance is required.
For indoor/outdoor use where protection against dirt, water and moisture is necessary.
Typical applications include oil refineries, petrochemical facilities, pulp and paper mills, food processing plants, warehouses, underground tunnels and general manufacturing facilities.
Corrosion-resistant fiberglass reinforced polyester body and hinged polycarbonate lens.
High impact resistance housing (20 Joules – IK10) from -40 °C to +55 °C (-40 °F to +131 °F) ambient temperature and wind profile for use in extreme offshore and onshore environments.
Latch assembly and elastomer gasket seals against water and dust ingress, IP66/67.
Easily accessed for maintenance using Allen key or straight blade screwdriver.
Central opening with unique patented release system to prevent damage.
Can be horizontally or vertically mounted.
Hinged parabolic reflector for high lumen output efficiency.
Vibration resistant spring loaded lampholders for bi-pin (G13) or mono-pin (Fa6) versions.
Positive safety switch disconnects power to lamps and ballast to allow maintenance in hazardous locations.
Electronic multi-tap ballast 110 to 254 Vac/Vdc +/- 10% 50/60 Hz, for global applications. High power factor electronic ballast (>0.95). EOL (End Of Life) protection in accordance to the latest EN/IEC 60079-7 standard.
Two channel ballast prevents dark areas by allowing one lamp to remain lit if one fails.
Ballast plug-in with Ex e connector for quick and error-free maintenance.
Available in 3 hour or 90 minute emergency versions, including multi-tap ballast with built-in monthly self test.
Test results through multi-colored LED.
Ex e battery with plug-in connector.
Fiberglass reinforced polyester housing
Highly reflective white polycarbonate internal reflector
Mounting accessories available in different materials such as gray painted aluminium, zinc plated steel, galvanized steel or 316 stainless steel