FEATURES
ÔÇó Easy to retrofit in same mounting footprint as AppletonÔÇÖs FE series non-metallic fluorescent luminaires.
ÔÇó Full range of lumen outputs, with light distribution equivalent to AppletonÔÇÖs FE series fluorescent luminaires.
ÔÇó Corrosion-resistant fiberglass reinforced polyester body and hinged polycarbonate lens.
ÔÇó High impact resistance housing (20 Joules ÔÇôIK10) from -30 ┬░C to +55 ┬░C (-22 ┬░F to +131 ┬░F) ambient temperature and wind profile for use in extreme offshore and onshore environments.
ÔÇó 60,000+ hour LED life at +55 ┬░C (+131 ┬░F) ambient for years of maintenance free operation.
ÔÇó Lightweight design, hinged cover with captive screws, and terminal block wiring for easy installation and maintenance.
ÔÇó Contemporary, low profile design suitable for tight spaces.
ÔÇó Standard screw-type terminal block can accept 1.5 to 6 mm2 wire.
ÔÇó Field replaceable LED driver.
ÔÇó Industry-leading thermal management for safe, reliable operation over wide temperature range.
ÔÇó Universal, high efficiency, drivers cover voltage requirements for 120-277 Vac, 170-300 Vdc, 50/60 Hz +/- 10%.
ÔÇó High power factor electronic driver (>0.95).
ÔÇó Standard 6KV surge suppression.
ÔÇó M20 plug or M25 plug provided.
ÔÇó Latch assembly and elastomer gasket seals against water and dust ingress, IP66.
ÔÇó Easily accessed for maintenance using Hex or Allen key or straight blade screwdriver.
ÔÇó Central opening with unique patented release system to prevent damage.
ÔÇó Can be horizontally or vertically mounted.
ÔÇó Available in 3 hour emergency version, including built-in monthly self- test. Test results through multi-colored LED.
ÔÇó Positive safety switch disconnects power to LEDÔÇÖs and driver to allow maintenance in hazardous locations (emergency).
ÔÇó Ex e battery with plug-in connector.
ÔÇó Available in 5000K and 4000K Color Temperatures
ÔÇó Meets Photobiological Requirement for Risk Group 0 (RG0).
SUITABLE LOCATIONS
ÔÇó For use in locations where:
ÔÇö Hazardous areas are designated as Zone 1, and 2, 21 and 22
ÔÇö A high degree of corrosion resistance is required
ÔÇö Protection against dirt, water and moisture is necessary
ÔÇó Typical applications include:
ÔÇö Oil refineries
ÔÇö Petrochemical facilities
ÔÇö Food processing plants
ÔÇö Waste and water treatment plants
ÔÇö Underground tunnels
ÔÇö General manufacturing facilities
MATERIALS
ÔÇó Housing: fiberglass reinforced polyester
ÔÇó Lens: polycarbonate
ÔÇó Diffuser: polycarbonate
ÔÇó Gasket: elastomer
ÔÇó Internal reflector: highly reflective white polycarbonate (standard versions) or powder coated aluminium (emergency versions)
ÔÇó Mounting accessories available in different materials such as gray painted aluminium, zinc plated steel, galvanized steel or 316 stainless steel
We are here to find the right components for your project.
